Please Install Flash Player
Download from here
Download from here
Home • Products • Chilling Units
We are acknowledged as one of the prime Chilling Units Manufacturers in India. The capacity of the Chilling Units ranges from 0.2 Ton to 20 Ton with the option to have them in full SS 304 Grade. We also manufacture Water Chilling Units that range from 1 TR. to 40 TR meeting the requirements of the applications like laser chiller, medical chillers, process chiller, machine cooling, aquarium chiller etc. Additionally, the robust structure and configuration of the Industrial Chilling Units has attracted national as well as international clients. Some of the salient features of the Chilling Units are as mentioned below :
Increased Production The speed and accuracy of production will increase as you maintain a constant and proper cooling temperature in your equipment. A chiller will reduce the number of rejected parts while increasing the number of parts produced per hour. You may ask yourself: "Does my equipment shut down during summer months?" -- "Are there periods where our rejection rate increases?" A COOLING TOWER may provide adequate cooling during winter months, but fail during the hotter periods of the year. A water chiller will immediately eliminate this problem. Why a Chiller? for Equipment Protection -The most compelling reason for a chiller is the protection it provides to your valuable process equipment-- such as laser machines , spot welders, injection molding equipment, and other applications. A chiller commonly represents a small fraction of the cost of the processing equipment, yet it provides solid protection of your investment, 24 hours a day, 7 days a week for years and years to come. Sizing a Chiller Correctly Simple instructions to Assure Proper Cooling The importance of selecting a correctly sized Water chiller cannot be downplayed. An undersized Water chiller will always be a problem-- never able to properly cool the process equipment. An oversize chiller will never be able to run at it's most efficient level. Specify the correct size chiller and enjoy years of continuous, efficient service. If you would like help, feel free to give us a call. We do this all the time. To size a water chiller properly you first need to calculate the delta T ( deg C)between the inlet and outlet water (the change in temperature), and the rate of flow in liters per minute (LPM). Measuring the delta T requires a thermocouple or thermometer. Check the water temperature of the water inlet line and the water outlet line, and subtract the numbers to compute how much heat the equipment is adding to the water. To measure the flow rate of the water place a flow meter on the outlet line of your equipment. If one is not available, simply measure the time it takes for the outlet flow to fill a twenty Litre bucket, and then compute your Litre per minute (LPM) of flow. Now that you have these two figures you need to calculate how many kcals (kilo calories of heat Units) your equipment dissipates. Here is the formula: kcals/ hour = (the weight of water) LPM x Temperature Difference (delta T) Repeat this for all the equipment you have, and add up the total kcals. Now that you have the kcals, lets compute the total Tons of cooling you need from a chiller. 1 Ton of cooling is 3000 kcals/hour hence. Tons = (kcals/hr) / (12,000) This is the minimum size unit you should need. Please keep another 20-25 % margin for There may be other circumstances, like planning for expansion, that would lead you to buy a different size unit. For more information about the specific units, please contact us. Salient Features of Process Water Chiller
Applications of Industrial Air cooled Water Chiller
The Fine Quality Component Features :
Air-cooled Water Chillers  |
|
